View previous topic :: View next topic |
Author |
Message |
mike Graduated to First 285
Joined: 26 Nov 2004 Posts: 6252 Location: Chesapeake Bay (Bodkin Creek, MD)
|
Posted: Wed Apr 02, 2008 7:05 am Post subject: 285 for sale - florida |
|
|
Link: Beneteau First 28.5
* Year: 1989
* Current Price: US$ 29,900
* Located In Punta Gorda, FL
* Engine/Fuel Type: Diesel _________________ Mike Hayden
'89 F285 WK, Hull #127 s/v Enchanté
'89 F235 WK, Hull #253 s/v Windependent my ex |
|
Back to top |
|
|
Gerard Corbino Tactician
Joined: 20 Oct 2004 Posts: 557 Location: Safety Harbor, FL
|
Posted: Wed Apr 02, 2008 9:27 pm Post subject: |
|
|
Mike:
Now you have gone and done it.
Damn near in my back yard too.
I'll call the broker in the morning.
What do you think I should pay special attention to when I go down to see her?
GC _________________ G Corbino
Former Owner of Little RUM
235 #145
Rumboogie
285 #112
Safety Harbor, FL |
|
Back to top |
|
|
alisdairs 1000 posts? Man Overboard!
Joined: 29 Dec 2005 Posts: 1251 Location: South River, Chesapeake Bay, MD
|
Posted: Wed Apr 02, 2008 10:28 pm Post subject: |
|
|
Oh my god...soon there'll be more 285 owners on here than 235's !! That's OK though, we still like you all !! _________________ 'Highland Fling'
1997 Oceanis 281
South River, Edgewater, MD
Former owner 'Atlantic Reach'
1989~WK~#276 |
|
Back to top |
|
|
mike Graduated to First 285
Joined: 26 Nov 2004 Posts: 6252 Location: Chesapeake Bay (Bodkin Creek, MD)
|
Posted: Wed Apr 02, 2008 11:11 pm Post subject: |
|
|
Gerard Corbino wrote: | Mike:
Now you have gone and done it.
Damn near in my back yard too.
I'll call the broker in the morning.
What do you think I should pay special attention to when I go down to see her?
GC |
the nice diesel engine is a huge plus in the boat, so maybe good engine logs and history, hours, etc. there is a pan under the engine you can check for evidence of stains and standing oil. touching the underside of the engine should leave you with a clean hand. i know i'm on my second water pump, something the PO did.
fresh water pump should pump up and not run until a spigot is opened, then cut off promptly after the system pressurizes. i ended up replacing/upgrading mine.
gel coat cracks or moisture readings specially between the primary winches, along and up to the forward end of the genoa tracks.
moisture in the rudder (most have some. i would not worry too much but it might help leverage the price).
integrity of the above waterline through-hull behind the oven. it's marlon or what ever that plastic stuff is. it gets a lot of sun.
emergency tiller present and accounted for (carl mentioned he didn't get one)
and then all the normal stuff. _________________ Mike Hayden
'89 F285 WK, Hull #127 s/v Enchanté
'89 F235 WK, Hull #253 s/v Windependent my ex |
|
Back to top |
|
|
Gerard Corbino Tactician
Joined: 20 Oct 2004 Posts: 557 Location: Safety Harbor, FL
|
Posted: Thu Apr 03, 2008 6:22 am Post subject: |
|
|
Thanks Mike.
Got any thoughts on the $29.9k price?
From what I've seen of the market it seems fairly high. And most of the boats are fresh water locations to boot.
Thanks again for your advise.
GC
PS My wife thinks I'm nuts to even think I can give up the RUM _________________ G Corbino
Former Owner of Little RUM
235 #145
Rumboogie
285 #112
Safety Harbor, FL |
|
Back to top |
|
|
mike Graduated to First 285
Joined: 26 Nov 2004 Posts: 6252 Location: Chesapeake Bay (Bodkin Creek, MD)
|
Posted: Thu Apr 03, 2008 6:53 am Post subject: |
|
|
Gerard Corbino wrote: | Thanks Mike.
Got any thoughts on the $29.9k price?
From what I've seen of the market it seems fairly high. And most of the boats are fresh water locations to boot.
|
the boat should be bristol for 30k and they are rare. there are some out there that command that price, don't know if this is one of them. the ones i have seen for $20k have been nothing i would be interested in. so somewhere in the middle lies the sweet spot.
i will say the details look nice and she sure looks clean. and a folding prop! very nice. those bad boys are expensive. _________________ Mike Hayden
'89 F285 WK, Hull #127 s/v Enchanté
'89 F235 WK, Hull #253 s/v Windependent my ex
Last edited by mike on Thu Apr 03, 2008 6:57 am; edited 2 times in total |
|
Back to top |
|
|
mike Graduated to First 285
Joined: 26 Nov 2004 Posts: 6252 Location: Chesapeake Bay (Bodkin Creek, MD)
|
Posted: Thu Apr 03, 2008 6:55 am Post subject: |
|
|
alisdairs wrote: | Oh my god...soon there'll be more 285 owners on here than 235's !! That's OK though, we still like you all !! |
al, get 'em while supplies last! _________________ Mike Hayden
'89 F285 WK, Hull #127 s/v Enchanté
'89 F235 WK, Hull #253 s/v Windependent my ex |
|
Back to top |
|
|
ericksnd First Mate
Joined: 19 Feb 2005 Posts: 211 Location: Morris, Minnesota
|
Posted: Thu Apr 03, 2008 10:10 am Post subject: |
|
|
I agree with Mike about the price. For 29,000 this boat better be perfect. I got my boat for 22k and by my thinking that gives me 7,000 dollars to spend on goodies. Of course, I'm probably not going to spend all that this year, but I will be on the water in a new/used boat for not much more (I hope) than I'll get when I sell Trekka and the pickup truck.
The engine seems to be the wild card, but with the inland boats I don't think it generally gets much use. _________________ David Ericksen
Skathi (First 285, Hull #80)
formerly, Trekka (First 235, Hull #274)
Morris, Minnesota |
|
Back to top |
|
|
Gerard Corbino Tactician
Joined: 20 Oct 2004 Posts: 557 Location: Safety Harbor, FL
|
Posted: Fri Apr 11, 2008 8:46 pm Post subject: |
|
|
I just got back from Punta Gorda where the Fla boat is berthed.
As you would expect with a very nice lady as its skipper, it is very very clean.
Even the engine compartment was better than I have seen on any used boat I've been aboard. Cleanliness is obviously the boats strong point. Apparently everything on board is original 19 year old equipment. That includes sails, engine, standing and running rigging, etc. All appear to be in working order though.
I was amazed by the access to the engine from all sides. I question if you can actually use the aft stateroom with the engine running because of the amount of noise and heat. Do you all have any thoughts on that point?
GC _________________ G Corbino
Former Owner of Little RUM
235 #145
Rumboogie
285 #112
Safety Harbor, FL |
|
Back to top |
|
|
mike Graduated to First 285
Joined: 26 Nov 2004 Posts: 6252 Location: Chesapeake Bay (Bodkin Creek, MD)
|
Posted: Fri Apr 11, 2008 9:37 pm Post subject: |
|
|
Gerard Corbino wrote: |
I was amazed by the access to the engine from all sides. I question if you can actually use the aft stateroom with the engine running because of the amount of noise and heat. Do you all have any thoughts on that point?
GC |
i have not spent a lot of time in the aft berth while motoring since i'm normally on the helm except to fetch something. i don't remember noticing any excessive heat; but of course the engine noise is obvious.
the crew has spent considerable time in the salon and other places below during extended motoring. no particular complaints although everyone does enjoy the return to silence when sailing begins again.
did you note the integrity of the anechoic padding on the inside surface of each removable panel and throughout the engine room? there is a big difference in db level with an open vrs closed panel, in no small part due to the padding.
i think i'd characterize the engine noise as pretty average.
did you sail it? if so, what were your impressions compared to the 235? _________________ Mike Hayden
'89 F285 WK, Hull #127 s/v Enchanté
'89 F235 WK, Hull #253 s/v Windependent my ex |
|
Back to top |
|
|
Gerard Corbino Tactician
Joined: 20 Oct 2004 Posts: 557 Location: Safety Harbor, FL
|
Posted: Fri Apr 11, 2008 10:26 pm Post subject: |
|
|
Mike:
The sound deadening foam looked original but competent.
My concern is more curiosity since I single hand and won't fine myself in the situation much.
No I didn't sail her, I was there to do a detail inspection to see what I thought needed to be replaced before I made an offer.
Minimum replacements on the list are sails, running rigging, auto helm, and diesel service. No small sum, but the old stuff is nothing I want to rely on out in the Gulf.
I did note that the spreader brackets looked suspiciously like what I replaced on the Run. Have you heard of any similar problems on the 285?
Thanks for all of your input.
GC _________________ G Corbino
Former Owner of Little RUM
235 #145
Rumboogie
285 #112
Safety Harbor, FL |
|
Back to top |
|
|
mike Graduated to First 285
Joined: 26 Nov 2004 Posts: 6252 Location: Chesapeake Bay (Bodkin Creek, MD)
|
Posted: Sat Apr 12, 2008 8:03 am Post subject: |
|
|
Gerard Corbino wrote: |
I did note that the spreader brackets looked suspiciously like what I replaced on the Run. Have you heard of any similar problems on the 285? |
no, i have not, but it is probably worth pondering. i have to go up to fix my windex and plan to look at my spreaders carefully and take a few pictures. _________________ Mike Hayden
'89 F285 WK, Hull #127 s/v Enchanté
'89 F235 WK, Hull #253 s/v Windependent my ex |
|
Back to top |
|
|
abstrait Site Owner & Administrator
Joined: 16 Oct 2004 Posts: 7537 Location: Wrightsville Beach, NC
|
Posted: Sat Apr 12, 2008 9:04 am Post subject: |
|
|
Gerard, did you ever resolve the mast clearance issue? The last I heard, it was right at the max for you to make it under the bridge. Did you get the exact figure?
I'd rather have access to the engine from all sides with a bit more noise than terrible access and less. Nothing worse than being hundreds of miles away from anything and not being able to easily access for a fix, even if it's a simple bang on the starter, screwdriver bridge, or a change of the belt. _________________ <font face="century gothic" size="1">Kelly Holsten � <i>abstrait</i>
'89 "clear" WK | Hull #327
www.beneteau235.com</font><br><br> |
|
Back to top |
|
|
mike Graduated to First 285
Joined: 26 Nov 2004 Posts: 6252 Location: Chesapeake Bay (Bodkin Creek, MD)
|
Posted: Sat Apr 12, 2008 9:22 am Post subject: |
|
|
as gerard probably noticed, the transmission, coupling and drive shaft are also nicely accessible. very good layout on beneteau's part. _________________ Mike Hayden
'89 F285 WK, Hull #127 s/v Enchanté
'89 F235 WK, Hull #253 s/v Windependent my ex |
|
Back to top |
|
|
audeojude I've lost my Babystay!
Joined: 30 May 2005 Posts: 2006 Location: Conway, SC
|
Posted: Sat Apr 12, 2008 1:39 pm Post subject: |
|
|
You can add another layer of insulation to those panels and the compartment which will drop the sound level considerably from what it currently is. I know of several cases where this was done and it had impressive results. _________________ Scott Carle
Sea Puppy
Hull # 27
Wing Keel
Conway, SC |
|
Back to top |
|
|
Gerard Corbino Tactician
Joined: 20 Oct 2004 Posts: 557 Location: Safety Harbor, FL
|
Posted: Sat Apr 12, 2008 6:03 pm Post subject: |
|
|
Mike I took some shots from the deck, but the resolution in good enough only to raise a question. I look forward to what you find up the mast.
Kelly, all I could do is tape the mast and then plumb and level to the water. Not exact, but clearly in the 40=' range like the scantlings convert to, rather than the 38 in the flier.
There are a couple of boats up here in Safety Harbor that exceed 40 and just play the tides when they head south. I think the 285 will clear at anything other that MHW.
Just got a helpful e-mail from Paul Hawrylyshyn alerting me to another 285 for sale just down the road in Port Charlotte. This is getting to complicated.
GC _________________ G Corbino
Former Owner of Little RUM
235 #145
Rumboogie
285 #112
Safety Harbor, FL |
|
Back to top |
|
|
Gerard Corbino Tactician
Joined: 20 Oct 2004 Posts: 557 Location: Safety Harbor, FL
|
Posted: Thu May 15, 2008 12:20 pm Post subject: |
|
|
!!!!!!!!FLASH!!!!!!
The Little RUM may very soon have a big sister.
My offer for the Punta Gorda 285 "Liberte" is acceptable.
Subject to survey, Safety Harbor will have another B boat in the fleet.
Mike, thanks for all the insights and suggestions.
You and Kelly have been an invaluable resource of information and entertainment.
Wish me luck.
GC _________________ G Corbino
Former Owner of Little RUM
235 #145
Rumboogie
285 #112
Safety Harbor, FL |
|
Back to top |
|
|
ericksnd First Mate
Joined: 19 Feb 2005 Posts: 211 Location: Morris, Minnesota
|
Posted: Thu May 15, 2008 1:32 pm Post subject: |
|
|
Congratulations! _________________ David Ericksen
Skathi (First 285, Hull #80)
formerly, Trekka (First 235, Hull #274)
Morris, Minnesota |
|
Back to top |
|
|
mike Graduated to First 285
Joined: 26 Nov 2004 Posts: 6252 Location: Chesapeake Bay (Bodkin Creek, MD)
|
Posted: Thu May 15, 2008 2:17 pm Post subject: |
|
|
Gerard Corbino wrote: | !!!!!!!!FLASH!!!!!!
The Little RUM may very soon have a big sister.
My offer for the Punta Gorda 285 "Liberte" is acceptable.
Subject to survey, Safety Harbor will have another B boat in the fleet.
Mike, thanks for all the insights and suggestions.
You and Kelly have been an invaluable resource of information and entertainment.
Wish me luck.
GC |
man, that is great news! woohoo! _________________ Mike Hayden
'89 F285 WK, Hull #127 s/v Enchanté
'89 F235 WK, Hull #253 s/v Windependent my ex |
|
Back to top |
|
|
Gerard Corbino Tactician
Joined: 20 Oct 2004 Posts: 557 Location: Safety Harbor, FL
|
Posted: Thu May 15, 2008 7:57 pm Post subject: |
|
|
Okay, survey is set for Wed. If it passes, the deal is done.
1st order of business is getting the painted on name "Liberte", off the hull sides.
Looks like urethane.
Suggestions welcome.
GC _________________ G Corbino
Former Owner of Little RUM
235 #145
Rumboogie
285 #112
Safety Harbor, FL |
|
Back to top |
|
|
Jon First 235 Crazy
Joined: 20 Oct 2004 Posts: 6813 Location: lake ontario
|
Posted: Thu May 15, 2008 8:10 pm Post subject: |
|
|
Gerard Corbino wrote: | Okay, survey is set for Wed. If it passes, the deal is done.
1st order of business is getting the painted on name "Liberte", off the hull sides.
Looks like urethane.
Suggestions welcome.
GC |
try easy off oven cleaner _________________ Jon
85' Laser 28 #167*Pandora*
87' F235 WK #69 my ex
Lake Ontario NY |
|
Back to top |
|
|
vanguardseven Deck Hand
Joined: 30 Jun 2006 Posts: 117 Location: Swans Island & Rockland, ME
|
Posted: Thu May 15, 2008 8:11 pm Post subject: |
|
|
I have removed painted-on names done in oil-based paint with EZ-Off oven cleaner. Use only the original formula in the yellow can; it is mostly lye, I think, so wear good gloves and maybe eye protection. What worked for me was to spray it liberally on the lettering, wait a while (maybe 5 minutes) then scrape off with a plastic putty knife, such as those sold for use with epoxy putty, bondo, etc. Rinse well with water, re-apply EZ-off, re-scrape, as needed. I finished up a few little remnants with a careful shave with a very sharp paint scraper and sanding as needed to remove the "shadow" left by the old name.
Neil W
F235 #112 Bijou |
|
Back to top |
|
|
Gerard Corbino Tactician
Joined: 20 Oct 2004 Posts: 557 Location: Safety Harbor, FL
|
Posted: Thu May 15, 2008 8:17 pm Post subject: |
|
|
Jon:
I expected the soy option. I understand there is a product called Poly-Soy .
Ever heard of soy being effective on polyurethane?
Thanks Jon & Neil.
GC _________________ G Corbino
Former Owner of Little RUM
235 #145
Rumboogie
285 #112
Safety Harbor, FL |
|
Back to top |
|
|
Jon First 235 Crazy
Joined: 20 Oct 2004 Posts: 6813 Location: lake ontario
|
Posted: Thu May 15, 2008 8:22 pm Post subject: |
|
|
Gerard Corbino wrote: | Jon:
I expected the soy option. I understand there is a product called Poly-Soy .
Ever heard of soy being effective on polyurethane?
Thanks Jon & Neil.
GC |
if you have any left over after the EZ-off deal round the corners off a razor blade & scrape with that. _________________ Jon
85' Laser 28 #167*Pandora*
87' F235 WK #69 my ex
Lake Ontario NY |
|
Back to top |
|
|
Gerard Corbino Tactician
Joined: 20 Oct 2004 Posts: 557 Location: Safety Harbor, FL
|
Posted: Thu May 15, 2008 8:49 pm Post subject: |
|
|
Thanks Jon.
GC _________________ G Corbino
Former Owner of Little RUM
235 #145
Rumboogie
285 #112
Safety Harbor, FL |
|
Back to top |
|
|
|